Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Update #2 200 1980

posted by  Amarin on  Sun Jan 20 03:20 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 22:42 CST 2014
[RELATED]

"FAQs said that installing the seal up to 1/8" (3 mm) deeper than the original seal is okay and might even give the seal a new gripping surface"

-> The FAQ is correct in that installing the seal deeper might give a new sealing surface. But nowhere in FAQ says its ok to install the seal crooked or misaligned.

Misaligned seal have uneven sealing forces acting on the crank surface prone to early oil leak.

Amarin.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Crankshaft Oil Seal Misaligned [200][1980]
posted by  1908242DLa  on Tue Jan 15 00:45 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.