Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Help ...strut/sway bar problem. 700 1988

posted by  Steve on  Tue Sep 8 00:28 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 07:16 CST 2014
[RELATED]

Disconnect the sway bar end links from both sides. Replace the sway bar body mounting hardware (bushings) if you need to with the bar ends left disconnected. Replace the sway bar mounting bolts to the body. To re-connect the bar to new sway bar end links and bushings, install one side first when the entire bar is loose. Then lift that control arm with a floor jack so you raise the entire sway bar up enough to install the other end link, and lower it down step by step so you can guide the link end into the hole in the sway bar.
--
See the 700/900 FAQ at the drop-down menu above right.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Help ...strut/sway bar problem. [700][1988]
posted by  MarkyMark  on Mon Sep 7 04:07 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.