Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2010 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Help ...strut/sway bar problem. 700 1988

posted by  MarkyMark on  Mon Sep 7 08:32 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 17 21:34 CST 2012
[RELATED]

Jerry thaks for the response.

The sway bar frame bolts seem afully short 1 1/4 inch from top of bolt to tip.

I'm having trouble compressing ew bushing enough to get the bolt in.

Can i go with longer bolts ? Will they stik up into the frame and scrw things up.

I've had to bottle jack the clamp to compress the bushing enough to even start the first bolt.

then bottle jack the tab of the other side to start that one.

that seems crazy....ihave a gap in the new bushing of about 1/4 to3/8 inches prior to compression with the brackets






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Help ...strut/sway bar problem. [700][1988]
posted by  MarkyMark  on Mon Sep 7 04:07 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.