Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2017 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Timing Belt and Crankshaft Pulley in B21F Engine 200 1980

posted by  planetman on  Fri Dec 28 21:34 CST 2018
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:29 CST 2014
[RELATED]

Tools like this will work to hold the camshaft and IS pulleys so you can loosen and tighten the retaining bolts.

FYI, if you want to change the crankshaft seal, you are going to have to pull the large bolt so you can remove the gear to gain access.

Although the camshaft and IS round tooth pulleys may bolt right, you won't be able to use the crankshaft gear unless you make some modifications to either the end of the crankshaft or to the round tooth crankshaft pulley.



--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90502
hiperformanceautoservice.com or oldvolvosonly.com






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Timing Belt and Crankshaft Pulley in B21F Engine [200][1980]
posted by  1908242DLa  on Fri Dec 28 12:26 CST 2018 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.