Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Lower A Arm Bushing (Rear of A arm) replacing. 200 1989

posted by  jthorner on  Thu Oct 8 01:58 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jan 4 04:02 CST 2010
[RELATED]

If you replace the bushing with another rubber one, buy the best you can get, not the $5 junk. Also, make sure to do the final tightening of the a-arm bolt through the bushing when the vehicle is on the ground putting full weight on the suspension. You want the neutral position to not have any twisting load on the bushing.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Lower A Arm Bushing (Rear of A arm) replacing. [200][1989]
posted by  NewMexico240 subscriber  on Wed Oct 7 12:54 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.