Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

I agree. OE steel & rubber for $14.34 at Tasca would be my choice. 200 1989

posted by  lucid on  Thu Oct 8 01:42 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:31 CST 2014
[RELATED]

Press the old one out and the new one in. Maybe $25± at a machine shop. Good for at least 50-75K miles in my experience. No alignment needed.

And you'd have the bonded torsional (rotational) "snubbing" control that I believe poly lacks. No torching and burning either.

At $4.54 each, it seems IPD is now in the MTC/URO junk trade.

--
Bruce Young, '93 940-NA (current), 240s (one V8), 140s, 122s, since '63.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Lower A Arm Bushing (Rear of A arm) replacing. [200][1989]
posted by  NewMexico240 subscriber  on Wed Oct 7 12:54 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.