Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 5/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Timing problems, '92 240 w/ B230F engine 200

"Temporarily reinstalled lower timing cover and crankshaft pulley (sans bolt), set no. 1 piston to TDC by turning the pulley until its notch lined up with the "0" mark on the lower timing cover."

Your problem could be that your pulley is going bad & needs to be replaced. If it is slipping you wont be able to time it this way. With the lower cover & pulley off you will see a timing mark on the crank sprocket. Use this as a timing reference instead.

Hope this helps!
Danny Mac






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Timing problems, '92 240 w/ B230F engine [200]
posted by  drb713  on Tue Apr 26 15:20 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.