Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 6/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

metallic click from rear end when brakes first appied 200 1986

posted by  Herb Goltz on  Fri Apr 15 06:46 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:23 CST 2014
[RELATED]

Hello Tom:

Are you dead sure your torque rod bushings are good?

I had this happen several months after having the torque rod bushings replaced on my '92 245. It turns out that the guy who put them in for me installed them incorrectly. These were FEBI Bilstein rubber torque rod bushings, and this guy installed them with the rubber segments 90 deg off.

I just bought the poly ones from FCPgroton.com and I am going to try again.

Another thought-- how are your motor/tranny mounts? Clearly you have some issues with differential transfer of mass under both positive and negative acceleration...

Let us know what fixes things for you...

--
Herb Goltz, London, Ontario, Canada '92 245 w/109K mi






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New metallic click from rear end when brakes first appied [200][1986]
posted by  tvg  on Fri Apr 15 04:41 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.