Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2010

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Toe in specs

posted by  rstarkie on  Sat Jul 29 09:03 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:14 CST 2014
[RELATED]

Thanks for your response. I understand the need for accuracy but today I am just chasing possibilities.

That 3/16" was total. Measuring across with a steel tape. I wasn't able to get the tape high enough on the back side because of chassis interference. Could be the total m Ishtar be more if I could.

I am in the process of changing out the control arm bushings at the present time ( I've got a bolt seized up on the front of one).

I may have a rotor that is warped that I hadn't noticed ( or disregarded) before. Last night applying the brakes seemed to be a contributing factor in the on set of some of the shimmy.

Thanks again.
Randy






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Toe in specs
posted by  rstarkie subscriber  on Sat Jul 29 07:40 CST 2017 >
  • New Toe in specs
    posted by  Michael Yount  on Sat Jul 29 08:42 CST 2017 >
    • New Toe in specs
      posted by  rstarkie subscriber  on Sat Jul 29 09:03 CST 2017 >
      • New Toe in specs
        posted by  Michael Yount  on Sat Jul 29 10:24 CST 2017 >
      • New Toe in specs
        posted by  jwalker  on Sat Jul 29 10:36 CST 2017 >
        • New Toe in specs
          posted by  rstarkie subscriber  on Sat Jul 29 12:14 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.