Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2022

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Toe in specs

I am still chasing the front end shimmy that I thought I might have resolved:

https://www.brickboard.com/RWD/volvo/1647031/740/760/780/front_end_shimmy.html

It is back and I continue to chase..

In checking (and double checking) the measurement difference from the front of the tires to the back of the tires (or as close as I can get without chassis interference) I have 3/16" toe in. That seems to be too much. My failing memory seems to recall a setting of 1/16"" but I am unsure. Specs on line are given in degrees and I don't know how to convert against my measurement.

When I replaced the tie rod end recently I counted threads and feel that I now have the same toe in as was present with the old tie rod end.

Using my "ball park" method what would be a reasonable amount of toe in?

Thanks,
Randy






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Toe in specs
posted by  rstarkie subscriber  on Sat Jul 29 07:40 CST 2017 >
  • New Toe in specs
    posted by  Michael Yount  on Sat Jul 29 08:42 CST 2017 >
    • New Toe in specs
      posted by  rstarkie subscriber  on Sat Jul 29 09:03 CST 2017 >
      • New Toe in specs
        posted by  Michael Yount  on Sat Jul 29 10:24 CST 2017 >
      • New Toe in specs
        posted by  jwalker  on Sat Jul 29 10:36 CST 2017 >
        • New Toe in specs
          posted by  rstarkie subscriber  on Sat Jul 29 12:14 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.