Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Cruise control not working after cluster replacement 700 1989

posted by  dialex on  Fri Sep 18 02:35 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Sep 26 21:50 CST 2014
[RELATED]

The car is 760 Turbo sedan, the speedo was working off and on, and when it was working, the cruise control was working too. I got a good deal on a used instrument cluster, and for some reason ever since I replaced it- cruise is not working. I went trough the vacuum hoses tests, took out the instrument cluster, and attached a V meter to the yellow cable - it reads between 5 and 23 mV to ground, and during acceleration it drops down to 5-6, after it climbs to 14mV and then 20- 21 mv at 55 mph. For some reason it seams to me that this is where the problem is. Any ideas?
Alex






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Cruise control not working after cluster replacement [700][1989]
posted by  dialex  on Fri Sep 18 02:35 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.