Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Transmission pan gasket issue 200

Hello all,
Last year I replaced my transmission pan gasket with a rubber gasket, I also used gasket sealer but a small drip was always constant. This weekend I noticed a puddle under the car. I removed the tranny pan and realized that the gasket was slit longways about a three inch slice.
I replaced the gasket with a non-rubber Fel-Pro brand. I torqued the 14 bolts to 44 lb. using a three inch extension. This morning there was a puddle under the car again. I got the socket set out and realized that the bolts were not tight-tight and were somewhat easy to turn 1/4.
Does using an extension effect the torque.
Tranny fluid continued to drip out the pan gasket while running errands this afternoon.
Should I tighten the bolts up again?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Transmission pan gasket issue [200]
posted by  NewMexico240 subscriber  on Mon Jul 9 17:42 CST 2018 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.