Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 5/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Setting the AMM ???????/LH.2.2 200 1988

posted by  darmstrong on  Sun May 1 11:11 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Sep 13 12:21 CST 2014
[RELATED]

I rechecked my notes. The pot has 15 turns to it.

If the test point voltage constantly reads high (no LED), the mixture is lean; constantly low (LED on constantly) is rich.

Turning the pot clockwise makes the mixture richer; counter-clockwise is leaner.

If you hook up the AMM tester between the test point and 12 volts, there is still 2 ways to connect it; try swapping the test point wires between test point and the 12 volt connection. If the LED is connected the wrong way, you will never get it to flash.

--
David Armstrong - '86 240(350k km?), '93 940T(270k km), '89 240(parts source for others) near Toronto






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Setting the AMM ???????/LH.2.2 [200][1988]
posted by  rsjones  on Sat Apr 30 12:39 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.