Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2006 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

FAQ description for adjusting AMM doesn't work... suggestions? 700 1988

uid 55's pic
posted by  john sargent on  Sat Sep 18 16:17 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 09:07 CST 2014
[RELATED]

It seems like the Radio Shack resistors were 680 ohm or so. That resistance may not be perfect, but it works fine.

Fifty turns and no change does not sound good. Try another AMM.

Instead of using the test port, you can put a multimeter on the O2 sensor output. You should get an oscilliting voltage from about 0.2 to 0.7 volts. If you don't, you have either a bad O2 sensor or a bad AMM.
--
john






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New FAQ description for adjusting AMM doesn't work... suggestions? [700][1988]
posted by  someone claiming to be 740ATL  on Sat Sep 18 12:30 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.