Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2019 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

FAQ description for adjusting AMM doesn't work... suggestions? 700 1988

posted by  someone claiming to be 740ATL on  Sat Sep 18 12:30 CST 2004 [RELATED]

Figuring a new AMM could be the answer to my crappy running I installed one from fcp and gave it a run.

The FAQ procedure for adjusting the AMM calls for building a small circuit (which I did), hooking it up to the CO test point and 12+ and while running the engine, look for a blinking LED while turning the AMM screw.

Well, soldering the circuit as shown in the figure left the LED OFF regardless of the number of turns in either direction.... reversing the wiring on the test LED circuit left the LED ON ALL the time.

Can anyone shed some light on this procedure? Got any other ideas? I'd really appreciate it.

Thanks.

Mike






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New FAQ description for adjusting AMM doesn't work... suggestions? [700][1988]
posted by  someone claiming to be 740ATL  on Sat Sep 18 12:30 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.