Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 10/2019 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Sucess! 200 1985

I went out to take a look but this engine is "crammed" into the back corner of my shop and it's in shadow and I didn't have my flashlight with me. 20'x24' shop with 14 double flourescent tubes and this thing finds a way to be in the dark! Well, using a lighter and looking at it the bast I could it is affixed to the block with a 45 degree fitting but the fitting does not look like your "common" brass 45. The end that screws into the block is "short" and the end on the other side of the elbow is about an inch long. The sender is oriented vertically when looking at it from the side.

You might be able to duplicate this with a couple of nipples and a 45 deg brass elbow...

I'll try to round of a flashlight and look at a bit better when things "warm" up this afternoon.


Justin






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Sucess! [200][1985]
posted by  stxavier2003  on Sat Feb 15 16:05 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.