Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 11/2000 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Injector question LH2.0 200 1983

posted by  runwld2 on  Wed Jan 29 03:18 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 30 13:11 CST 2014
[RELATED]

According to Bentley, the rail is removed with injectors from the head, but it also says that if injector is stuck it may be removed seperately.
I'd remove the rail whole by unbolting the regulator from the manifold. Remove the connectors fromthe injectors, but keep the fuel hoses attached. Appling power to each injector you can teat it (and catch the fuel). I'd get a manual to see how to do this, even a Chiltons at the library would help.
Ifthe car is rich (mine is so rich it will not start now) it is either the computer opening the injectors too long or the injectors are leaking or the fuel pressure is too high (caused by malfunctioning return regulator). I'd check the resistance specs ofthe temp sensor first (pin 2 of the ECU).
--
744-16v,745-16v,242Turbo.245DLT






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Injector question LH2.0 [200][1983]
posted by  Breadman  on Tue Jan 28 06:47 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.