Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 12/2000 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Re: M46 - Frozen Fill Plug 200 86

posted by  someone claiming to be Jerry Andersch on  Mon Nov 20 03:37 CST 2000 [RELATED]

Zee,

If you can get a large pipe wrench on it ... give it a try. Just had to break a transaxle fill plug loose on my son in laws Honda Civic. Nothing else but the plumbers tool would do it. Once it got a bite on the plug it just wouldn't let go. Must have taken 120 foot pounds to break it free! I replaced the chewed up, rounded off, SOB plug with new. I did put a bit of anti-seize compound on the threads so it shouldn't produce any extened periods of swearing and knuckle busting next time around. Good Luck.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New M46 - Frozen Fill Plug [200][86]
posted by  someone claiming to be Zee  on Sat Nov 18 15:51 CST 2000 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.