Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 2/2014 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

has anyone else ever seen this on a caliper 200

posted by  pageda on  Thu Nov 19 19:25 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:18 CST 2014
[RELATED]

This is what I posted about a year and a half ago on the subject.

"I got an early 80's non ABS caliper for the solid rotor with 3 bleeder valves sold to me as a 92 ABS caliper. One of the brake line Ports was capped off so there was only one available.

This is a first for me!"

Rebuilding non ABS calipers for use on ABS cars may be a somewhat common practice.

The rebuilt caliper I got a year and a half ago was clearly older from a car with solid rotors. There was no way it was going to be installed on a vented rotor. I suspect the rebuilder did not know there was a difference between solid and vented rotors / calipers and mistakenly rebuilt the older caliper.

ABS caliper cores must be rare.

Dan






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 2 has anyone else ever seen this on a caliper [200]
posted by  trichard  on Thu Nov 19 11:22 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.