Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Engine code 2-3-1 on a 240 200 1990

posted by  pageda on  Sun Oct 24 13:02 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:18 CST 2014
[RELATED]

You want to place a jumper wire on the left side of the fuses and leave it in place, this will force the fuel pumps to run. If the engine starts the fuel system relay needs replacing.

The 25 amp fuse near the battery should be check for corrosion at the fuse holder and the connection at the battery. This fuse is for the injection and ignition systems.

Both of these are common problem areas that can be intermittent.

Dan






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Engine code 2-3-1 on a 240 [200][1990]
posted by  mshonline  on Sun Oct 24 01:59 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.