Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2004

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

stalling 92 940 need help

uid 18083's pic
posted by  lucid on  Fri Sep 10 12:19 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:31 CST 2014
[RELATED]

Hi Mike,
Yes, I remember some or all of them were loose & shaky after removing coils etc. But I soldered wires onto them like that, and then packed J-B weld around them for support. I didn't have the right colors to match the original wiring, but was careful to connect "rack socket" terminal 30 to "extended socket" terminal 30, 86-2 to 86-2 and so on.

I'll bet Art had all the right wire colors, but they really don't matter as long as 30 connects to 30, 85 to 85, etc. Maybe 1/2 hour and you'll be done. Just double check each wire/terminal with meter continuity to be sure.

I think my wires were about 18" long, but am not sure now.


--
Bruce Young, '93 940-NA (current), 240s (one V8), 140s, 122s, since '63.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New stalling 92 940 need help
posted by  hardknocks! subscriber  on Wed Sep 8 11:13 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.