Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2005 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

source for fasteners 120-130

posted by  walrus3 on  Tue Oct 21 03:11 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 2 14:20 CST 2013
[RELATED]

They are not all SAE - They are all Unified. Unified National Fine (UNF) replaced the old SAE and BSF years ago, but many threads on Volvos are coarse,
Unified National Coarse (UNC) which replaced USS and most of the BSW threads
also.
I don't think there are any 8-24 machine screws on Volvos - this is a nonstandard thread and much too coarse for a #8 screw. The standard pitches for #8 machine screws are 8-32 UNC and 8-36 UNF. 8-32 screws are used in some quantity and are generally available.
Even on a #10 screw, 24 threads per inch is quite coarse, leaving a pretty small root diameter. Nonetheless you will find both 10-24 UNC and 10-32 UNF screws in various places on Volvos.
Note - the term "Volvos" as used in this context includes models 122, 132, 220, 140, 164 and 1800. Earlier and later Volvos are mostly metric.
--
George Downs, Bartlesville, Heart of the USA!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New source for fasteners [120-130]
posted by  mcfly subscriber  on Mon Oct 20 16:50 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.