Volvo RWD S90-V90 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2005 S90-V90 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Faulty switch/how to remove wood trim? S90-V90

posted by  picayel on  Sat Mar 22 08:37 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 6 13:12 CST 2010
[RELATED]

In both cases that I have done it - one from a junkyard 96 960 and the other from my own 96 960, the trim (fake wood) were attached to the cluster itself. Yes, it has (left to right) head light, dimmer, fog light, etc. All came off as one. I just inserted a thin flat head screw driver in between the dash and the left most (vertical) edge of the cluster and pried. They came off easily both times.

Headlight and dimmer switches were snapped to the cluster from the back with catches. I believe the other switches can be pried off from the front without removing the cluster.

When I bought my 960, the headlight and dimmer switches worked fine but were not seated properly. I rationed that the catches were broken so I got this cluster from the junkyard for replacement. After removing my own, I found the catches were actually fine so I just re-seated them. Now I have this one extra cluster with all the switches sitting there for backup.

/picayel
86 240DL SW
94 850 SW
96 960 SW






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Faulty switch/how to remove wood trim? [S90-V90]
posted by  hans747  on Sun Mar 16 12:06 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.