Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2008 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ignition switch replacement - how to proceed? 700 1989

posted by  mauipaul on  Sat Aug 4 09:22 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 13 19:21 CST 2009
[RELATED]

I would like to say this job is easy but as Herb and Randy know
it is a pain in the _ss !!!

Only due to the access of the bottom screw about 1/2 inch long.
Yes you need a little mirror on a 6 inch handle and a light source and most importantly a short, 1/4 inch wide flat head screwdriver. and a telescoping magnet in case you drop the screw.

When you remove the instrument cluster (first pop off the two thin horizontal plastic cover plates there is one Phillips head screw on the each lower side of the panel) (you may want to take a digital photo before removing the 7 different electrical connectors so you have no concerns about putting it back together) but most of them only can fit on one way...

I is actually just one of those jobs requiring patience. Could take you a half hour or an hour and a half depending on dexterity.

Thanks to all,

Maui





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ignition switch replacement - how to proceed? [700][1989]
posted by  mauipaul  on Fri Aug 3 23:48 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.