Thanks for the replie on the control arms-will set up the tq today for taking care of that problem. On the large bushings-I took a block of wood and beat the old ones out-then used a little white lithium grease on the edges and carefully started the bushings back in-with my vise I worked them around the top edge of the bushing being carefull not to get to the center and worked the bushing back down slowly until seated-it's like working the bushing back 1/8 of an inch at a time and making sure your getting it seated back where it needs to go and not damage the sucker while pushing it back in.
Hope that helps
Poolman