The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Transmission mount good or bad? 200

The bushings are cheap. I think fcpgroton has them for buck or so. The ones they sell are the poly ones. One tip, the poly bushing are a little harder to install since they are stiff, but I'm sure they out last the rubber ones. The rubber ones are easier to intall.

To change them. Put the car on stands. Crawl under to find the shift linkage. It goes from the shifter to the trany, you'll see it. You should find play in it if there are worn. I think there are three bushings (or maybe two), but get an extra one in case. One of the links is held in place with a e clips (don't drop it), the other ones with a 13mm and 14mm bolts. Not too hard to remove, just hard to press the poly bushings. Last I did it I removed the shifter from the car and did it on the bench.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.