Volvo RWD 700 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 3/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Throttle body removal question 700 1987

posted by  someone claiming to be James Silliman on  Wed Nov 15 02:31 CST 2000 [RELATED]

Taking a look at my throttle body, the ball and socket on the left side that opens and closes the throttle plate, how do I remove that (the ball and socket) so I can get the TB off? I've read the FAQ several times and the archives, and it mentions that there is a tab to bend. I don't see any tabs, only the socket covered in rubber. It looks like it should just pop off if you pull on it, but it does not.

Do I loosen the ball and socket (tighten one, loosen another) and that pops it off?

Other than that, it looks like the throttle body switch wiring needs to be removed. That pop off easily?

Thanks.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Throttle body removal question [700][1987]
posted by  someone claiming to be James Silliman  on Wed Nov 15 02:31 CST 2000 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.