Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Rebuilt starter and solenoid but still no start 200 1989

posted by  denisv on  Tue May 21 11:33 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 14 11:16 CST 2011
[RELATED]

Thanks to those who offered advice on bypassing a neutral switch, which I thought was the problem of a no start on my 89 240. I ended up installing a rebuilt starter and new solenoid. After doing so, I now get a click from the solenoid when I turn the key but no action from the starter. The NSS allows the "click" in the neutral and park positions so it seems that was not the problem after all. I tried to jump the wires off the solenoid to the starter with the ignition key on but I do not even get a click. Did I err in not having the rebuilt starter tested before installing or is there some other issue in the ignition system preventing the starter from getting power through the solenoid? Advice?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rebuilt starter and solenoid but still no start [200][1989]
posted by  denisv  on Tue May 21 11:33 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.