Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Removing cam gears & crank gear on B234F 700

posted by  fran krause on  Tue Sep 28 11:15 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hello,
I'm planning on changing my timing belt on my 89' 740 GLE with the B234F 16-valve engine. I don't know how well the previous owner kept up with the maintenance, so I plan on replacng all the belts, covers, pulleys, water pump, oil pump bolt, and shaft seals. I was wondering if there were any tips on getting the timing gears and crank gear off to replace the seals. I was planning on leaving the belt on while I do the initial loosening of the bolt, so any slips don't make the valves contact the pistons. I was planning on keeping the gears steady with a wide pair of channel-lock pliers with rubber hose on their jaws. Will this work?
Thanks,
-Fran





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Removing cam gears & crank gear on B234F [700]
posted by  fran krause  on Tue Sep 28 11:15 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.