Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Third Brake Light 200 1983

posted by  bugsy on  Tue Sep 28 11:04 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I just installed a third brake light on my 83 245 Turbo. The bulb out warning light now comes on every time I hit the brakes. I realize that if the bulbs are different it will cause this to happen, so I made sure that both bulbs are the same. I am wondering if it is because of the way I hooked it up. I simply spliced into one of the brake light wires. Now I am thinking it is happening because it is pulling more from one side than the other. Is this right? If so, could I run a wire from the other side to the third light also? Is it ok to pull from both regular brake lights to the third brake light? Any advice is appreciated! Thanks!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Third Brake Light [200][1983]
posted by  bugsy  on Tue Sep 28 11:04 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.