Volvo RWD S90-V90 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2006 S90-V90 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Drilling a Hole in Oil Cap or Re-Routing Excess Gasses S90-V90 1998

posted by  jwalker on  Mon Jul 8 12:37 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jun 6 08:39 CST 2014
[RELATED]

If it were my car, I’d throw away the flame trap screen at a minimum. Did that on my 240 and 850 with no issues. You could also throw away the entire flame trap and replace with a hose as you more or less mentioned.

If you are willing to go down this road, you could also try Auto-Rx. Might help. An excellent sludge cleaner. Used it on my 850.

Out of curiosity - Did you ending up replacing the rear cam seal? Was it the cam positioning sensor that was in the way?

--
Will I buy another Volvo??? We'll see....






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Drilling a Hole in Oil Cap or Re-Routing Excess Gasses [S90-V90][1998]
posted by  HerrGruyere  on Mon Jul 8 11:26 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.