Quantcast
RWD - 1990 240 new pads, rotors but no pedal at all

Volvo RWD 200 Forum

INDEX FOR 8/2019(CURRENT) INDEX FOR 9/2015 200 INDEX [<<]  [>>]

 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE   A    A 

1990 240 new pads, rotors but no pedal at all 200 1990

Bench bleeding is actually easier with the master cylinder on the car.

Remove the brake lines at the master cylinder. Attach the fittings and hoses from the "kit" and direct the hoses into the reservoir. Slowly pump the brake pedal until no more air exits the hoses. Remove hoses and reattach the brake lines and bleed in proper sequence.

Randy
--
Any twenty minute job is just a broken bolt away from a three day ordeal






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1990 240 new pads, rotors but no pedal at all [200][1990]
posted by  bikerider  on Thu Jun 20 13:08 CST 2019 >

Cut and paste link:

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2016. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts