Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

How to slide the loose, unclamped tailpipe from the 240GL Wagon, and to disconnect the muffler from its mount. 200 1986

posted by  Kindofhandy on  Wed Mar 28 12:27 CST 2018
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

What bulletproof said. I just figured this out on my first venture into exhaust repair. It was only after installing a new IPD sport catback, re gasketing the header, and installing a new bosal downpipe that I realized last weekend that my 30 year old cat is literally empty. Unintended straight pipe. So now I've done the unscrew the hanger trick twice, and I may have to do it again to line up the new cat.

I will join the chorus above in saying that that you may want to lube the holes in the rubber hanger. That saved a lot of fight against the hanger undoing my screwing and unscrewing of the mount.

Oh my, the multiple entendres.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 How to slide the loose, unclamped tailpipe from the 240GL Wagon, and to disconnect the muffler from its mount. [200][1986]
posted by  XPEG_656  on Sun Mar 19 20:36 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.