Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

comments on cordless impacts wrenches...for my excursions to the pull and save 200

posted by  1966-estate on  Fri Sep 28 05:38 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jan 30 13:50 CST 2014
[RELATED]

although i don't have any exp. with cordless impact wrenches, i have a couple air impact's. one came with a air tool set & the other with my compressor. the big difference is the ft. lbs of torque they are rated at. the cheap one is 200-300 ish and i can't even take lug nuts off with it, the porter cable one is up around 450-500 ft lbs. the only thing its failed me one was the front lower a arm bolt that was siezed in the crossmember sleeve of my 122.

so definatly look for a high torque value if your going to get an electric impact, at least 400-450 ft lbs.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 comments on cordless impacts wrenches...for my excursions to the pull and save [200]
posted by  someone claiming to be kriscarlson  on Thu Sep 27 16:21 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.