Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2008 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Replacing the oil separator and PCV system 850

posted by  KlausC on  Sun Apr 15 09:51 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

I don't know which bolt you are refering to, but the PS pump and thermostat housing do not get removed! The fuel lines get loosened, there should be a bracket at the top of the cam cover which is easily removed.

There is a bracket holding the intake manifold, its bolt is under the manifold and about 1 inch behind the bolt for the dipstick.

The bottom bolts for the intake manifold just get loosened about 3 turns, you will need a 6 in extension and 'feel' where the bolt head is.

Klaus
--
My name is Klaus and I am a V ♂ lv ♂ holic






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replacing the oil separator and PCV system [850]
posted by  austi012  on Sat Apr 14 15:29 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.