Volvo V8 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2024

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Why did Ford do this?

posted by  Volvo4dv8 on  Wed Nov 25 09:02 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 20:06 CST 2014
[RELATED]

My power steering pump is going south. So I'm trying to remove it. It turns out I'm going to have to remove the radiator to get the pump off. The radiator I just replaced last month. Damn. A stud is part of the mount for the PS pump. So I thought I would take the stud out and the pump would come right out. Nooo, The stud is bigger on the end that screws into the head and that is behind the mount for all the accessories. The mount hole is the size of the small part of the stud so the stud won't come out. This must have to do with the heads being the same for right or left. Air injection on one side, mount hole on the other.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Why did Ford do this?
posted by  Volvo4dv8  on Wed Nov 25 09:02 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.