Volvo RWD 140-160 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2005 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

164 clutch & flywheel 140-160

posted by  jparker3 on  Wed Apr 13 08:08 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jun 9 18:47 CST 2009
[RELATED]

I have a customer with a 70 164 who wants to install one of our aluminum flywheels and performance clutch setups. We have used essentially the same setup on all models from the 544, 140, 240, 740 etc., but not the 164, and I don't have a clutch and flywheel to measure.

Assuming the same 6 bolt crank pattern and same flywheel ring gear as other models, our normal AL flywheel will fit. The question is the throwout ( release ) bearing.
Our AL flywheel is not as thick as the stock b20 flywheel, so we use a longer throwout bearing to compensate. Not knowing how thick the combination of 164 flywheel and 164 pressure plate is compared to a 140 B20 combination, I don't know how long the throwout bearing will have to be to compensate for any differences.
The customer is going to be doing his own installation and does not have the car apart yet, so he can't provide the measurement.
Can anyone help in comparing the dimensions on the 140 B20 flywheel and clutch to the 164 B30 flywheel and clutch?

John
V-performance.com






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 164 clutch & flywheel [140-160]
posted by  jparker3  on Wed Apr 13 08:08 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.