Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2023 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

brake system leak 900 1996

posted by  FletchFFletch on  Mon Oct 11 17:28 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 17 05:42 CST 2011
[RELATED]

My 960 has developed a brake fluid leak at the combination valve located below the master cylinder. The leak is at the large reducing nut at the top of the valve. I have tried tightening the nut without removing the valve, with no luck. It appears that there might be some sealant on the nut, too. I know if I pull the valve out that I will have to bleed the whole system. Will I have to buy a new valve? I possible to remove the nut and reseal it? If so, what do I use to seal it?

thanks,

Fletch






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New brake system leak [900][1996]
posted by  FletchFFletch  on Mon Oct 11 17:28 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.