Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Removing AW71L from my 940 - need advice 900 1991

uid 6185's pic
posted by  blue940 on  Thu Sep 30 18:46 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 21:11 CST 2014
[RELATED]

I will be removing the AW71L auto transmision from my 91 940 sedan next week. I've had a look at the location and size of the bolts and most things look reasonably straightforward. However, I do have a couple of questions for those who have been there done that.

There are 2 bolts (18mm I think) on top of the transmission - one bolt on either side of the crankshaft sensor. How do I get at these bolts? From the top or underneath? Spanner? Socket with a universal joint? I tried fitting a socket with a universal joint in there but the firewall was too close and there was not enough room.

Does the crankshaft (RPM) sensor need to come off? I can't see how to get anything down there to remove the bolt? Is it a 10mm bolt?

If anyone has any other words of advice (except for "DON'T DO IT!!!) I would be glad to hear from you.

Thanks
Brad






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Removing AW71L from my 940 - need advice [900][1991]
posted by  blue940  on Thu Sep 30 18:46 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.