Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

instrument cluster removal 900

posted by  Jim Holst on  Thu Sep 30 09:13 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jan 4 11:05 CST 2011
[RELATED]

If your 945T is like my 945NA, there will be two small slots, one at each end of the bezel covering the instrument cluster. You take a small screwdriver and push on the latching piece which is behind these slots. While doing this, you pull out on the bezel. Do one side at a time. The bezel on mine was a .... to get out the first time, pretty tight.

Once the bezel is off, you'll see 4 screws, two at each end of the cluster, if my memory is right. Remove these screws and the cluster comes out with the usual wires connected. I lubed the latches so maybe next time the job will be easier.

The FAQs were helpful but I didn't expect it to come out so hard.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New instrument cluster removal [900]
posted by  someone claiming to be Tim  on Thu Sep 30 03:18 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.