Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2018 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to clear error code 900 1994

posted by  spook on  Tue Jun 22 14:06 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 08:06 CST 2014
[RELATED]

Dear Alan,

Good a.m. and hope this finds you well. On the strut tower - the one closest to the intake manifold - you may see a large rectangular box, with cooling fins. That means you have the Rex/Regina ignition system. If you see a small cylindrical device, that indicates you have Bosch ignition.

Also, on the strut tower brace, if you have the Rex/Regina system, you will see a rectangular device about 40mmx75mm. That is the manifold air pressure sensor, part of the Rex/Regina system.

Hope this helps.

Yours faithfully,

spook






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How to clear error code [900][1994]
posted by  alanclarkeau subscriber  on Tue Jun 22 11:41 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.