Volvo RWD 1800 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2011 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oops! 1800

posted by  CyaLater on  Wed Dec 17 05:24 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

C cam is about 210 degrees at .050" with .265" lobe lift.
D cam is about 220 degrees with .280" lift.
I have a profile which I call a 'high-lift D' has 220 degrees @ 0.050" with .300" lift that develops some more midrange torque & works well with D-Jet or SU's, but the trade-off is it doesn't last as long as a D grind. I'd like some higher ratio rockers to pur with the D grind. Only need 4 for the inlets.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Cam shaft [1800]
posted by  ColinSpikes  on Tue Dec 16 17:18 CST 2003 >
  • New Cam shaft [1800]
    posted by  someone claiming to be Charles Greenlaw  on Tue Dec 16 18:55 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.