Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2000 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Manual setting of mixture screw on K-jetronic system 200 1980

posted by  someone claiming to be Rhys on  Thu Sep 11 13:18 CST 2003 [RELATED]

Turn it clockwise to go rich until the engine idles smoothly. Go lean until the idle falters, go back to just rich enough to regain the smooth idle. You can't hurt anything, and the proper adjustment is "in there". A bit of trial and error, and you will find the setting - it is a finite point, no magic to it. The intial setting is done by Bosch of course, and I have no idea how they achieve it.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Manual setting of mixture screw on K-jetronic system [200][1980]
posted by  mikeH2  on Thu Sep 11 12:47 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.