Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2019

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

IPD vs FCP Groton for front suspension bushings

posted by  Ben Vahl on  Tue Apr 22 10:08 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I'm going to be purchasing the control arm bushings and washers for my 91 940SE. I'm a little confused on price differences between IPD's kits, which are $86 rubber and a little less for Polyurathane.
FCP Groton doesn't do a complete kit, but buying all the parts will only add up to around $35 total (Scantech)

Is there some difference in the quality of the parts?

I'm also curious about polyurathane. Is it good or better than the rubber bushings? I saw in the archives that some folks had trouble with steering geometry changes due to the PU being longer than the rubber ones.

Thanks!

Ben





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New IPD vs FCP Groton for front suspension bushings
posted by  Ben Vahl subscriber  on Tue Apr 22 10:08 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.