Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

actuator rod in keylock/column lock, new kid on block needs help 200 1983

posted by  jdfruit on  Tue Apr 22 10:04 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I am the recent new owner of an '83 244, 2.3L auto. Car came with the steering column lock not having the actuator rod from key tumbler assembly to the ignition switch. Currently am using a screwdriver to operate ignition switch. The car came with another column lock including key tumbler but no key.

Can the actuator rod be extracted from the new lock body and installed in the old lock body?

Any help is greatly appreciated.

Thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New actuator rod in keylock/column lock, new kid on block needs help [200][1983]
posted by  jdfruit  on Tue Apr 22 10:04 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.