Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 2/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Automotive machine shop for replacing bushings 200 1982

posted by  mkatt on  Sun Feb 23 13:04 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Apr 27 17:40 CST 2013
[RELATED]

I recently had to go to a machine shop when I needed the bushings pressed from the front control arms. I was charged $10 for each bushing plus I had to have pressed one of the old balljoints from the mounting plate.
I didn`t know where to go either so I called a couple of auto parts places and they recommended this one guy and I have no regrets.
See what you can do. It`ll probably be cheaper at a machine shop and they`re usually pretty well equipped and experienced.

Jim S.`86 245 208k






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Automotive machine shop for replacing bushings [200][1982]
posted by  dash  on Sun Feb 23 12:05 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.