Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 2/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Kickdown Cable Sticking 200 1990

posted by  someone claiming to be Kurt on  Tue Feb 18 08:13 CST 2003 [RELATED]

I just replaced this on my '86 wagon. If you really work at it, you can lubricate the cable enough to get it functioning. Disconnect the cable from the engine and its bracket, then hold the cable vertically and spray WD-40 down it. Keep working the cable back and forth. This will work for a few months at best. If you replace it, do what the Haynes manual says. Really not too bad of a job. If you go this route, ask the BB for more pointers.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Kickdown Cable Sticking [200][1990]
posted by  Hunteryik  on Tue Feb 18 07:25 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.