Volvo RWD 140-160 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 12/2000 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

b20 engine mount bolt extraction repair. 140-160

posted by  wolwo's are us on  Tue Jan 28 16:59 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]


Yes there are left handed drill bits. Normally they come with an extracting
set.(Snapon, Mac, possibly sears has them) Ron, Brett are correct, the studs
should turn out with some access. If they are seized, drilling and tapping
is one choice the other that i prefer is to (providing you have a mig welder)
weld a bead on the end of the broken bolt then weld a nut onto that.
they always come out with that type of torture.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New b20 engine mount bolt extraction repair. [140-160]
posted by  uniberp  on Tue Jan 28 05:37 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.