Volvo RWD 140-160 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 1/2003 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

b20 engine mount bolt extraction repair. 140-160

posted by  brettsutherland on  Tue Jan 28 07:38 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Apr 22 13:00 CST 2011
[RELATED]

Hi MP

Just had exactly the same thing happen with the B20B in my 122..... thought the motor mount had collapsed so bought a pair .... Imagine my surprise to find the engine literally hanging on by the top bolt with the front bottom one completely missing and the rear one with the head snapped off .... it came out very easily with a punch and a hammer .... maybe a small cold chisel .... there was no tension on the bolt as it wasn't bottomed out ... hope you have as good luck with yours .... I might suggest that you give the other side a check while you are at it .... it was missing one bolt on the other side and one other was loose ..... I replaced both engine mounts although on inspection it was not really necessary inserted new bolts all around and tightened everything back up ... Quite a difference !!!

--
Brett Sutherland & the 1.5 million mile 122 Canadian






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New b20 engine mount bolt extraction repair. [140-160]
posted by  uniberp  on Tue Jan 28 05:37 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.