Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2002

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

More tranny bits M41...Attn: Peter

posted by  matt b on  Thu Nov 21 09:25 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 14 16:33 CST 2014
[RELATED]

Well...I'm not the one that will actually be doing the teardown...or rebuild. I was just sorta figuring though that...if the bearings are OK, and re-usable (specailly if I can't find new ones), why take 'em out at all.

My thought on the procedure... REmove selecter rods, remove main shaft. Then remove/replace reverse gear. Layshaft should be able to stay in place.

If...the main shaft can be removed without dropping the layshaft as you mentioned that is....

I'll keep you updated. I sorta doubt teh VOlvo guy doing the work would even be willing to do it my way though. And I don't feel confindent enough to try it myself. I want to be sure this thing is done right. Maybe I'll try another teardown of a different box for my own experimentation/education another time....

-Matt






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New More tranny bits M41...bearings [140-160][1971]
posted by  matt b  on Mon Nov 18 10:47 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.